Pulse Valve

Electromagnetic Pulse Valve / Diaphragm Valve / Solenoid Valve:

It is the switch for compressed air in the dust clean blowing system of the pulsejet bag filter. Controlled by the output signal of the pulsejet control device (Sequential Timer), It makes dust clean to the filter bags cell by cell or row by row to keep the resistance of the bag house within the set range and thus guarantee the processing functions and the dust collecting efficiency of the bag house.

[Show as slideshow]

Electromagnetic Pulse Valve is a right angle valve ( 90⁰) between inlet and outlet which is suitable for the installation connection between the gas dome (compressed air receiver tank ) and the bag house blow tube provide good air flow and dust clean pulses satisfying the requirements. We import this pulse valve from SBFEC, Shanghai (A Joint Venture Company of W.L Gore, Inc, USA). We are the exclusive Indian agent for these categories. There are different model also available viz. Right angled, Embedded, Right angled and fixed nut at both end, Straight In straight out, Turn around Jet type.

[Show as slideshow]

Pulse Valve Index of make SBFEC/W.L Gore(JV): Model: (DMF –Z- Nb S) (DMF-ZM-Nb S) (DMF-Y-Nb S) (DMF-T-Nb-S)

• DMF –Z- 25/40S/50S/62S/76S/90S/90S/102S (DMF –Pulse Valve, Z– Right Angle, Nb-Numbers – Diameter, S – Double Diaphragm, M- fixed Nut at both end, Y – Embedded/Immersion, T-Straight IN)
• Types: Z- Right angled, Y- Embedded, ZM- Right angled and fixed nut at both end. T – Straight In, Jumbo Special: Turn around Jet

Specification:

Material of construction:

• Body: High pressure diecast Aluminium
• Armature: 430FR Stainless Steel
• Diaphragm & Seal: Nitrile
• Spring: 321 Stainless Steel
• Screw: 302 Stainless Steel

Working Index:

• Working Media: Clean, dry and Oil free air
• Working Pressure: 4kg/cm2 to 6kg/cm2
• COIL Voltage: DC 24V AC 110V AC 220V
• Current: 0.8A 0.46A 0.23A
• Temperature Level: -25 to 80⁰C -25 to 150⁰C -25 to 230⁰C
• RH factor: ≤ 85%
• Protection Class: IP 65